Tuesday, February 4, 2014

Embosser Tools

A wide variety of tools are used to create embossed designs for diverse projects.


Embossing first appeared with the Roman alphabet for the use of putting sentences on paper. The first embossed book for the blind was published in 1786. Since then, embossing has become an art form, adding elegance and importance to paper and craft projects. A variety of embossing tools are available ranging from professional to amateur types.


Handheld and Electronic Embosser


Both handheld and electronic embossers will give the same look to a paper using the same die cut. Electronic machines are best used for high volumes of embossing in which a handheld would be tiring. The depth of the embossed image depends on the die and type of paper. If you have a shallow die, a lighter paper works best. For a deeper die, a heavier-duty paper can be used. Many electric embossers are used for a company logo or seal that will be used frequently.


Stencil Embosser


A stencil embosser, or dimensional stenciling, often is used with a textured medium. The stencil embosser is placed over the item to be embossed. A trowel is used to apply the medium over the stencil, leaving a raised embossed print. This technique can be used on a variety of paper, wall or fabric surfaces, depending on the medium.


Dry Stencil Embossing


Dry embossing is used with paper; the depth will depend on the stencil. To make a dry embossed print, use a shadow box and stylus. The stencil is placed on the shadow box, followed by the paper to be embossed. The stylus presses the empty area of the stencil, creating depth on the paper.


Heat Embosser


A heat embosser is used with stamps, embossing ink and embossing powder. The stamp is inked and pressed on the paper to be embossed. The embossing powder is sprinkled over the stamped area. The heat embosser heats the area until the stamped image is melted over the image, creating a shiny and raised design.


Die-cut Craft Machine


Many die-cut craft machines can perform embossing tasks through the use of embossing templates. Some of the popular machines are the Cuttlebug and Cricut. The paper is placed in a plastic embossing template and run through the machine, pressing the image and creating an embossed, raised area.